MARSSEAL 2000 is a Specially formulated single pack, high quality, elastomeric waterproof coating, and it is designed for liquid roof coating and wet areas. It is a super waterproofing which does not age or harden, having good thermal tolerance and UV resistance.
Waterproofing roofs, plaza and car park decks.
It can be used as protective UV resistance sleeve coat for costly resin or other vulnerable when exposed waterproofing system.
Protective membrane for PU installation.
For repair of old or existing damaged waterproofing system.
For use as waterproofing for wet areas (bathrooms and kitchens)
For damp proof membrane in sandwich construction as a general purpose waterproofer for walls, floors and other constructions.
It is also an effective adhesive and bonding agent for insulation boards, cork panels, etc.
It is practically suitable where some movements of structures is expected, exhibits much better permeability and elasticity characteristics than similar material without latex.
|White, Grey, Red, Blue
|after 1 hour
|After 2 days (2mm thickness) depending on weather and site condition.
|Water vapor permeability
|5,8g/m2 for 24 hours emersion
|Extension of break up
|Should be stored in dry and cool place in its original un-opened container.
1.25kg/m2 millimeter of thickness
Heatlth And Safety
It is recommended to use rubber gloves during working with MARSSEAL 2000. Incase of contact with eyes flush with plenty of water.
Tools used for MARSSEAL 2000 should be cleaned with water directly after use.
Excellent elastic regain
Flexible at low temperatures
Superb adhesion to all sound roofing surfaces
Outstanding exterior durability UV light, infrared and ozone resistance
High resistance to dirt pick up hence long term reflectivity and lower air conditioning costs.
Low toxicity and odor.
Low moisture vapor transmission
Excellent film integrity
Pedestrian Properties of the roofing membrane
Ensure that the surface to be treated is free from any loose particles, dust, oil, dirt, extra cement blocks and especially sand. Clean a second time, using a soft broom or a vacuum cleaner, to make sure that the surfaces are absolutely dust free.
Apply one coat of diluted MARSSEAL 2000 (1:1 with water) by roller, brush or spray gun.
When applying on a defective bitumen layer use 100g/m2
For concrete surfaces use no more than 200g/m2
Wait at least three hours.
Note: Fiber Coating
It is advised for a heavy duty and long lasting application to lay fiber on the surface to be treated. This fiber can be applied on the existing cracks only.
Apply one coat of MARSSEAL 2000 without adding any water to it on the entire area.
Incase of using fiber layer, apply MARSSEAL 2000 in one direction to avoid bubbling of the fiber.
Wait 24hours for the first coat to dry, then apply the second coat of MARSSEAL 2000.